Kits

 

Assembled Controllers

MiniESP3 - $55 ready to go to work.


I generally have a few other kits assembled. Inquire as to availability.

Kits Available

MaxESP3 - $54 Fully featured controller at a great price, moderate skill level.

MiniPCB2 - $55 Powerful 600MHz ┬Áprocessor in compact packages. Easy to assemble and program with Teensyduino. Limited to stock on hand.

STM32 - $25.00 Everything to build the BluePill, except the BluePill. 

STM32 - $35.00 Everything to build the BluePill, complete, limited to supply on hand.

SHC ESP32 - $29 Features the 1.3" OLED display and external antenna.

BHC - $10 Includes PCB, Momentary switches and RJ-12. 

Motor drivers not included. Inquire about about what we have on hand.

PCBs, any of the PCBs for the kits may be ordered individually. $8 shipped in the U.S. $14 elsewhere.

D1 mini with antenna - $6. I am modifying the D1 minis for the antenna as the "Pro" is now running about $7 and the modified D1 Mini seems to have a stronger signal.

HC-05 and BT adapter PCB for MiniPCB2 and STM32 - $9.

Aluminum enclosure for MiniPBC2 - $8. Limited stock.






13 comments:

  1. Hi George
    Please see email for kit
    Thanks

    ReplyDelete
  2. CONTACT ME AT stm32bluepill@gmail.com to order, thanks.

    ReplyDelete
  3. Help please I ordered a couple of the BIGTREETECH TMC2130 SP! drivers from a local supplier https://aus3d.com.au/stepstick-tmc2130 can I use these or have I ordered the wrong item they have two pins on one end at right angles to the other pins.

    Please advise,
    regard, peter.

    ReplyDelete
  4. Yes, just cut the 2 pins on the end at the both top and bottom. Don't try to remove them. The other four on the side can stay if they are not in the way. Otherwise, cut off the top only. These are set up for use on the 3-D printer controllers.

    ReplyDelete
  5. George, I'd like to order a system of the best, most complete controller, drivers, and associated items you can sell me or direct me to. This is to convert a Dobson 12 telescope. Please advise. Also, I sent you an email with similar request. - Thx

    ReplyDelete
  6. George, I'd like to order a system of the best, most complete controller, drivers, and associated items you can sell me or direct me to. This is to convert a custom built 12.5 in Newtonian telescope with a GEM. Please advise. Also, I sent you an email with similar request. - Thx

    ReplyDelete
  7. Hi there, I like you work and proyect, but I am not very sure if I will be able to carry out and be successful with the DIY. I would like to know if you have the complete set including controller, motors and the whole hardware ready to install, plug in and use it in a Celestron CG5 mount which in my case need an upgrade and is laying at the corner since I bought the Skywatcher EQ6R PRO. And not least important, do you have available international shipping service to Chile, in South America.

    ReplyDelete
  8. Contact me at stm32bluepill@gmail.com to discuss.
    Thanks, George

    ReplyDelete
  9. Sent mail request for kit on 13th Jan 2022...

    ReplyDelete
    Replies
    1. Sorry, I didn't get you message. Please try again at stm32bluepill@gmail.com.
      Thanks, George

      Delete
    2. Done. That was the email address I sent it to :-)

      Delete
  10. I would like to order the MiniESP3 ready to work. How can I order it from you?

    ReplyDelete
    Replies
    1. Contact me at stm32bluepill@gmail.com
      Thanks, George

      Delete