Order Kit

 Ordering: Contact us at stm32bluepill and provide the following:

  • The nation that the kit will be shipped to.
  • Your email address.
                                                                                        PCB        Full
                                                                                       Only         Kit    
STM32 - kit - No longer available                 
STM32 - kit less Bluepill $25.                                   ______    ______   
MiniPCB2 $55 kit - limited supply                             ______    ______
MaxESP3 $44 kit                                                       ______    ______
MiniESP3 $50 Assembled/tested                             ______    ______
D1-R32/Hujer Shield $35 Assembled/tested ______ ______
Smart HC (ESP32) $25 kit.                                          ______    ______ Basic HC $10 kit.                                                         ______    ______ 

Options:                                
WeMOS D1 Mini to HC-05 BlueTooth adapter - $6                  ______   
            (includes HC-05)
WeMOS D1 Mini w/antenna - $4                                           ______  
BME sensor - $6                                                                          ______ Drivers - a unit when purchased with w/kit.
Limited to supply on hand.
TMC5160 - $127.50                                               ______
TMC2130 - $6.50                                                ______ 
ST820 - $2                                                             ______ 
TMC2208 - $3                                                        ______ 
TMC2209 - $5.50                                                   ______ 
DVR8825 - $3                                                        ______ 

All payments are via Paypal. A Paypal invoice will be emailed to you. Once payment is verified, your kit(s) will be shipped.

Shipping

All prices are exclusive of shipping. Shipping is based on our cost. There are no extra charges for customs forms or packaging. Unless otherwise specified by the buyer we use the least expensive method of shipping. In the U.S. that’s 1st Class parcel up to 15 ounces. Full kit currently $8. Priority Mail above 15 ounces. Internationally, USPS 1st class can be used up to 1.8Kgs. Full kit under 0.5Kg, currently about $19.50, except the South Pacific. The £20 exemption is gone on imports. All just another effect of BREXIT. VAT and customs are the buyers responsibility.

Thanks, George

20 comments:

  1. wpJanuary 27, 2021 at 9:20 AM

    This comment has been removed by the author.

    ReplyDelete
  2. UnknownJuly 9, 2021 at 11:09 AM

    hello by any chance do you have a Nexstar Tripod to Photo adapter plate? looking to use the tripod with a Star Adventurer and would like a 3/8 mount to it

    ReplyDelete
  3. GeorgeJuly 10, 2021 at 8:34 AM

    Not aware of any such accessory. Back in the day Celestron sold an adapter that mounted on the wedge to hub threads and had a center screw for the mount. It had a 1/4-20 threaded screw. Of course 'Nexstar Tripod" includes several models and I am referring to the standard field tripod. If I needed such an adapter 'd just get one of these rounds and machine it. https://www.ebay.com/itm/361297051564?hash=item541efb7fac:g:xy0AAOSwPe1ULgYE

    ReplyDelete
    Replies
    1. UnknownJuly 18, 2021 at 2:59 PM

      thank you for the response ,George by any chance do you where i can get the measurements for a Nexstar 8se tripod
      to make precise cuts

      Delete
    2. GeorgeJuly 19, 2021 at 9:59 AM

      https://www.cloudynights.com/topic/597435-tripod-nexstar-4-5-on-mount-6-8/

      Delete
  4. Manuel A.July 18, 2021 at 1:55 PM

    This comment has been removed by the author.

    ReplyDelete
  5. Manuel A.July 18, 2021 at 1:55 PM

    Hi, which kit is the most complete for a cg4 mount ?

    ReplyDelete
    Replies
    1. GeorgeJuly 19, 2021 at 9:30 AM

      Not sure what you mean by complete. Each kit consists of the printed circuit board and all the components needed to finish a working controller except the step motor drivers, which are optional. Where the controllers are different is in the number of optional features they support. The MaxESP3 offers the most feature support, then the MiniPCB2 and 3rd the STM32. But each fully supports OnStep goto functions. The MiniPCB3, which is only sold assembled and tested is essentially a MaxESP3 without the connectors for a focuser and rotator and the ESPduino32/Hujer supports a few less features, like encoders. If you have any other questions contact me at my email: stm32bluepill@gmail.com

      Delete
  6. Manuel A.July 18, 2021 at 1:55 PM

    This comment has been removed by the author.

    ReplyDelete
  7. UnknownJuly 23, 2021 at 10:00 PM

    Hi I would love to purchase one of these I have the funds my questions is can I pay you to completely build the kit for me so when I get it all I have to do is plug and go?

    ReplyDelete
    Replies
    1. GeorgeJuly 25, 2021 at 4:15 PM

      Please contact me at stm32bluepill@gmail.com rather than using the comment section.
      Thanks, George

      Delete
  8. MesquitaAugust 4, 2021 at 5:44 PM

    This comment has been removed by the author.

    ReplyDelete
    Replies
    1. GeorgeAugust 5, 2021 at 4:28 PM

      Please see https://www.stmbluepillkits.com/p/kits.html other kits are $35 additional for assembly and testing, except the SHC which is $25.

      Delete
  9. MattconnyFebruary 16, 2022 at 2:35 PM

    Hi, can you please I’m not sure which kit I need to run my telescope,guide camera & Focus.
    Thanks Matt

    ReplyDelete
    Replies
    1. GeorgeFebruary 16, 2022 at 3:14 PM

      Hi Matt, more than happy to advise you, just drop me a line at stm32bluepill@gmail.com

      Thanks, George

      Delete
  10. DaveElsonNovember 2, 2022 at 5:47 PM

    This comment has been removed by a blog administrator.

    ReplyDelete
    Replies
    1. GeorgeNovember 4, 2022 at 3:33 PM

      Out of commission with surgery this week. Yes, kits available. Drop me a note at stm32bluepill@gmail.com

      Delete
    2. DaveElsonNovember 4, 2022 at 3:39 PM

      Thanks George - sent an email Nov 1. Get Well Soon.

      Delete
  11. Steve's RCNovember 2, 2022 at 6:33 PM

    Hi George
    I too emailed you an order on Oct. 31 and I wonder if you are still offering kits for sale.
    Thanks
    Steve

    ReplyDelete

Subscribe to: Posts (Atom)